اخبار القسم en
Ph.Dr.Awfa abdulrasool participates in a solidarity stand as part of the Women’s Empowerment Unit
Written by عضو ارتباطThe Biomedical Engineering Department participated, represented by the teaching staff (Ph.Dr. Awfa Abdul Rasoul Abdullah)
In the solidarity stand held today at ten in the morning in Tahrir Square on Monday, January 8, 2024.
This is in solidarity with Palestinian women in Gaza
.jpg)
.jpg)
“Drugs are a dangerous scourge that destroys society.”
Written by عضو ارتباطThe Department of Biomedical Engineering at the University of Technology held an awareness lecture in Al-Quds Hall
Titled
“Drugs are a dangerous scourge that destroys society.”
For teachers and members of the department
Delivered by Ph.Dr. Ali Fadl Baawi
The lecture addressed several topics. The first topic dealt with the phenomenon of drug abuse as it is one of the most dangerous crimes that has the greatest impact on the individual and society
The second topic dealt with the legal articles and penalties imposed on those who use various types of drugs, as well as the reasons for the spread of the phenomenon of drug abuse to protect society from its dangers. It also talked about how to address the phenomenon of drug abuse to save the addict from the danger of drugs. Many types of drugs were presented during the symposium. Including natural and manufactured drugs, as well as synthetic (chemical) drugs. The symposium recommended the need for concerted efforts among the concerned authorities to reduce this phenomenon and tighten penalties in Iraqi law. It also urged that each individual take his role in reducing drugs.
Eng. Mohammed jwamer participated in the First Arab Conference on Biomedical Engineering Technologies
Written by عضو ارتباطEng. Mohammed jwamer, in the Biomedical engineering department participated in the First Arab Conference on Biomedical Engineering Technologies
and received a certificate of participation for attending the conference via Zoom from the General Secretariat of the Federation of Arab Engineers
Wishing more success and excellence.
A lecturer in the department receives a certificate of participation in a conference
Written by عضو ارتباطAssistant lecturer. Marwa Jamal Muhammad, participated in the First Arab Conference on Biomedical Engineering Technologies
She received a certificate of participation for attending the conference via Zoom from the General Secretariat of the Federation of Arab Engineers
Wishing her more success and excellence.
The Biomedical Engineering Department at the university organized a field visit to the Iraqi National Museum
Written by عضو ارتباطThe Biomedical Engineering Department at the university organized a field visit to the Iraqi National Museum. Accompanied by a group of teaching staff
Asst.Lec. Atheer audience
Asst.Lec. Wissam Zahim
Asst.Lec. Manhal Rahim
To visit this visit is part of a series of visits visited by the Department of Life Medicine, but the visit is to provide scientific and cultural knowledge for our students.
The visit was characterized by new information provided by the museum staff about the artifacts, including statues, obelisks, manuscripts, and seals dating back to ancient civilizations that embody the ancient history of Iraq before the invention of writing, and such as the five civilizations of Mesopotamia, the Sumerian, Akkadian, Babylonian, Assyrian, Islamic, and the Kingdom of Hatra.
A lecturer in the department receives a certificate of participation in an international conference held in Malaysia
Written by عضو ارتباطPh. Dr. Ali Jalal Ali, a lecturer in the Department of Biomedical Engineering, received a certificate of participation for his research paper in the Ninth International Conference in the field of Mechanics and Engineering Manufacturing.
Which was held in Malaysia on 11-15-2023
Entitled "Analysis of Solar Radiation and Temperatures Reduction Methods to Avoid Brain Stroke"
We wish him more scientific successes in service to our country and our beloved university.
A lecturer in the Biomedical Engineering Department participated in the discussion of the master thesis
Written by عضو ارتباطA lecturer in the Biomedical Engineering Department, Assist. Prof. Awfa abdulrasool ,, participated in the discussion of the thesis (as a supervisor) of the Master student specializing in material scince (Aya saad ) on 27/9/2023 for the research tagged:
"Preparing aluminum metal matrix composites reinforced with hybrid particles "
A teaching staff member in the department receives a letter of thanks and appreciation from the University President
Written by عضو ارتباطAssistant Professor Dr. Jinan Sattar Khashan, teaching in the Department of Biomedical Engineering, received a letter of thanks and appreciation
From the Honorable President of the University of Technology, Professor Dr. Ahmed Mohamed Hassan Al-Ghaban, in appreciation of the efforts made in publishing solid scientific research within the containers of Clarvit and labeled
"Effect of multi-walled carbon nanotube on the microstructure, physical and mechanical properties of ZrO2-CaO/Poly (methyl methacrylate) Biocomposite for Bone Reconstruction Application "
We wish her more contributions to serve our university and our beloved Iraq.
A lecturer in the Biomedical Engineering Department participates in the discussion of doctoral dissertations
Written by عضو ارتباطA lecturer in the Biomedical Engineering Department, Assist. Prof. Saad Mahmoud Ali, Head of the Biomechanics Branch, participated in the discussion of the thesis (as a supervisor) of the doctoral student specializing in production engineering (Laith Fadel Shaker) on 11/12/2023 for the research tagged:
" Experimental Investigation of Nano-Powders to Enhance Magnetic Abrasive Finishing Performance”
A lecturer in the Department of Biomedical Engineering publishes two papers in two Clarivate journals
Written by عضو ارتباطA lecturer in the Department of Biomedicine, Assist. Prof. Saad Mahmoud Ali, Head of the Biomechanical Branch, published two research papers in two journals from Clarivate Containers. The first research paper is entitled:
"A Novel Design and Simulation of a Nano Prosthetic Artificial Heart Valves"
The first research aims to design and manufacture unique models of eight artificial heart valves that were examined using seven synthetic and nanocomposite materials to determine the best designs and materials in terms of durability, flexibility, and energy consumption. Biomechanical performance was also improved using the response surface methodology (RSM) and expert systems. The research was published in the International Journal of Engineering in Vol. 37, Issue 2, February 2024.
The second research is entitled:
"Improvement of the Fatigue Life of 3D Printed Nano Soft Artificial Heart and Heart Valves"
The second research aims to design, manufacture and test advanced models of a soft human artificial heart and artificial heart valves using nanocomposite and synthetic materials. It was also examined to determine the best service life for each type by simulating the diastolic and systolic pressures that occur in a normal heart. A new generation of a soft artificial hearts has also been produced by 3D printed techniques for permanent replacement and has a service life of tens of years, while the alternative to the temporary mechanical hearts currently implanted with high costs and a service life of no more than five years. The research was published in the Iranian Journal of Materials Science and Engineering in Volume 20, Issue 4/January 2023.
More...
A teaching assistant in the department publishes research in an international journal
Written by عضو ارتباطAsst.Lec. Marwa jamal Mohamed, teaching in the Department of Biomedical Engineering at the University of Technology
Publishes research in an international journal within Scopus databases entitled:
"Utilize Chitosan to Coat Hydroxyapatite on Polymer"
The research addressed that increasing osseointegration by applying polymer coatings to ceramics using the dip-coating method represents a challenge in itself for the success of the process of coating polymeric materials on ceramic materials using the previous method.
This research aims to create a new interface to enhance osseointegration. This interface between the polymeric part and bone tissue overcomes the problems and malfunctions that occur in metal limb implants in amputees. As a result of its rejection by living body cells or lack of good cohesion between the implant and the contact site. In this work, PEEK plastic is coated with a biocompatible active material (hydroxyapatite). The polymeric parts that are implanted inside the bone will be used as an anchor for the metal screw that is used in the implanted prosthesis. This research is one of a series of research working to enhance the osseointegration of bones in the simplest and most efficient ways.
A workshop entitled “Germany is a living experience in implementing the Bologna Process”
Written by عضو ارتباطUnder the patronage of the Head of the Biomedical Engineering Department, Prof. Dr. Wissam Kazem Hamdan
In implementation of the directives of the Ministry of Higher Education and Scientific Research, the Department of Biomedicine was established
Organizing a workshop by the Studies and Planning Division in the department
Titled “Germany is a live experience in implementing the Bologna Path”
On the importance of the mechanism for implementing the Bologna Pathway System, which is scheduled to be implemented starting from the next academic year 2023-2024.
Delivered by Professor Asst.Lec. Wissam Zahem Muhammad, in Al-Quds Hall on Sunday, 5/11/2023.
The workshop was attended by faculty members and associates in the department
The workshop addressed the definition of the education system (Bologna Process) applied in German universities and the importance of this system for students and graduates, as well as the definition of the requirements for implementing the Bologna Process. How teachers deal with the system, how to create a prescribed description of the curricula in a manner consistent with the above system, and how to manage scheduled and unscheduled hours.
.jpg)
.jpg)
.jpg)
.jpg)
Ph.Dr.Awfa abdulRasool obtains a certificate of participation in the International Conference for Scientific Research
Written by عضو ارتباطPh.Dr. Awfa Abdel-Rasoul, in the Biomedical Engineering Department , obtained a certificate of participation in the international conference held for scientific research and innovation.
The published research showed that the improvement in the corrosion rate and mechanical properties of aluminum metal matrix composites can be manufactured from Al/SiCn composites and Al/SiCn/hybrid composites.
The Biomedical Engineering department held a workshop on drug addiction and its effectst
Written by عضو ارتباطIn implementation of the instructions and recommendations of the Ministry of Higher Education and Scientific Research and under the auspices of the President of the University of Technology, Prof. Dr. Ahmed Muhammad Hassan Al-Ghabban
And Head of the Biomedical Engineering Department, Prof. Dr. Wissam Kazem Hamdan.
As a continuation of the series of workshops held by the Department of Biomedical Engineering/Division of Studies and Planning, the department held
The Department of Biomedical Engineering at the University of Technology organized a workshop on drug addiction and its effects, with the participation of undergraduate students and a number of department professors.
The workshop, which was delivered by Ammar Abbas, aims to raise awareness of the dangers of drugs and their spread among young people due to their harm to the individual and society, and to limit their spread.
The workshop included introducing the concept of drugs and addiction to them, their causes, harms and negative effects, and the symptoms of a person addicted to drugs.
