اخبار القسم en
Discussion of a graduation project entitled "Development and validation of biomaterial for biomedical application"
Written by عضو ارتباطDiscussion of a graduation project entitled "Development and validation of biomaterial for biomedical application"
Where the research dealt with the applications of using nanomaterials extracted from jitosan. At the beginning, an overview of the wound healing process was presented, followed by a discussion on the properties of jitosan and its nanoparticles and their suitability for treating wounds. Then the mechanisms exerted by chitosan nanoparticles (in the wound healing process) were addressed, discussed and analyzed critically and in detailed sections. We mention, among them; hemostasis, preventing infection, immune response (inflammatory) and the time taken to close the wound.
Student names:
Ahmed Tariq Tawfik
Taha Qusay Taleb
Bilal Samir
Hussein Ali Mahdi
Discussion committee names:
Prof. Dr. Jinan Star Khashan
Asst.lect. Mays Sabah
Asst.lect. Saad Mahmoud
supervisor name :
Prof.Dr.Sabah saad
Discussion of the graduation project entitled "Design and implementation of smart hydraulic damper for artificial limbs"
Written by عضو ارتباطDiscussion of the graduation project entitled "Design and implementation of smart hydraulic damper for artificial limbs"
the project discusse Smart Hydraulic Damper is part of sem-active type prosthetic Knee. Magneto rheological Damper is type of Smart Hydraulic, which assists prosthetic knee to performing all function with small energy and high control. The principle of MR prosthetic knee depending on spring-damper mechanisn and generater mechanisn wich work harmony together. The spicial properties of MR Damper is low consumption of energy and absorbing shock that causes reduces inflammation in end of transfamer. The results show the designed MR damper is better than off-the-shelf MR dampers for the application
Students names :
Ali Faleh Mortada
Hussein Laith Abbas
Muhammad Mahdi Adnan
Zainab Karim
Discussion Committee:
Ph.Dr. Jamal Mohamed Hamad
Ph.Dr. Enas Saad Mohammed
Eng. Ayoub Qassem
.jpg)
Discussion of a graduation project entitled "BUILDING AND DEVELOPMENT OF A PROTOTYPE CENTRIFUGE AND MINI-REFRIGERATOR FOR MEDICAL EQUIPMENT"
Written by عضو ارتباطDiscussion of a graduation project entitled "BUILDING AND DEVELOPMENT OF A PROTOTYPE CENTRIFUGE AND MINI-REFRIGERATOR FOR MEDICAL EQUIPMENT"
Student's name:
1- Ali Abbas Abo Alhail
2- Mustafa Laibi Madah
3- Sajjad Hassan Hawi
supervisors:
Asst. Prof. Dr. Awfa Abdul Rassoul Abdullah
Asst. Lec. Dalia Muhammad Ali
Discussion Committee
ِِAsst.Dr. Alaa Mohamed Dawood
Asst.Lec. Husam Yahya
Asst.Lec. Atheer Jumhur
Centrifugation is a very old technology, and with the advances in the medical field and laboratories, it has faced many challenges. In this project, we have developed effective tools for the centrifugal process. Where we started by designing a centrifuge prototype
body, rotor, motor base, and brake components using the program (AutoCAD) and printed using Anycubic i3 Mega 3D printer. there are safety components including a micro switch or a lid sensor to automatically turn off the motor when the lid is open and a brake unit to stop the motor simultaneously when the user opens the lid.
as well as This mini fridge can store the samples at appropriate temperatures to transfer them to the specialized medical care center to perform the necessary medical tests on them. A temperature range between (5–10 °C) was obtained.
Discussion of a graduation project entitled "Preparation of the arc furnace for powder products"
Written by عضو ارتباطDiscussion of a graduation project entitled "Preparation of the arc furnace for powder products"
Student names:
Hassan Riad Majid
malak Hatem Owaid
Nour Al-Huda Riyad Nasser
Zine El Abidine Khaled Ajeel
project supervisor :
Prof. Dr. Marwan Nafeh Ali
Names of the honorable debaters:
Ph.Dr. Ziad Qassem Habib
Asst.lect. Hossam Yehia
Asst.lect. Hoda Taleb
Electric arc furnaces (EAFs) are extensively employed in steel production and nonferrous metal smelting. Typical electric arc furnaces have a power range of 10MW to 100MW. Laboratory electric arc furnace is a minimized AC electric arc furnace which consumes around 5KW of power. The aim of remodeling a minimized EAF is to refine some types of metals to have much better electrical and thermal conductivity, the way of getting these characteristics in laboratory with a cost-effective method is by melting the material using the minimized EAF, then rapidly cooling the molten metal with crushed ice put around the crucible. Using this type of EAF in combination with this cooling method will give smallest grain size possible after the material reforms in a mold (amorphous crystal shape), which is the best in terms thermal and electrical conductivity. Stainless steel is an example for the materials that could be refined in that way, which can be used in variety of applications in the biomedical field and prosthetics inside the human body.
"Detection of corona virus using computerized tomography images"
Written by عضو ارتباطA group of fifth-grade students discussed a research entitled
"Detection of corona virus using computerized tomography images"
Students names
Youssef Abdul Razzaq Ajeel
Ibrahim Aladdin Mahdi
Maryam Hussein Khalil
The names of the discussion commite
Ph.D. Uday Fahd's piety
Asst.Lect. Dalia Mohamed Ali
The project based on CT scan chest images which entered into a system (set of codes algorithms) and used matlab to diagnosis COVID19, the program is started by image reading processing and finally covid detection by serial steps. System implements will use colors to label the infected parts of the lung and then shows the results as normal or Covid-infected patient.
Mechanical properties of a denture base polymer reinforced with natural and man-made fibers
Written by عضو ارتباطMechanical properties of a denture base polymer reinforced with natural and man-made fibers
Students' names
Ahmed Owaid Thajil
Basmala Hussain Majid
Bara Jassim Hadi
Raneen Fathallah Ghazi
Discussion Committee
Ph.D. Marwan Nafie Ali
Asst.Lect. Dalia Muhammad Ali
Where the research included addressing the problems of fracture of artificial teeth, where the fracture of dentures made of acrylic resin is still an unresolved problem. There is no ideal base material for dentures, but the properties of PMMA can be improved with some reinforcement. Therefore, the aim of this study is to improve the mechanical properties of the denture base material, and this was done by using synthetic glass fibers and natural toothpicks.
Design and Development of Industrial Monitoring System using LabVIEW
Written by عضو ارتباطDesign and Development of Industrial Monitoring System using LabVIEW
Students names
Youssef Abdel Karim
Zahraa Ghazi Attieh
Zahraa Hussein Hashem
Abdullah Iyad Salem
The names of the discussion committee
Dr. Ziad Qassem
Asst.lect. Diyar Jalal
A health condition monitoring application in LabVIEW will focus on this project. The health conditions will be monitored in real-time using a simulation setup to perform real-time monitoring of crucial health indicators such as temperature, blood pressure, oxygen level and other parameters. LabView software was used to create the system's capabilities successfully. Data from sensors were successfully simulated and logged and shown clearly and concisely. The system's performance was evaluated and found to satisfy the predetermined standards. This system may notify the user if specific parameters exceed or fall below a predetermined threshold by sounding an alarm or displaying a visual indicator. For automation operations, a crucial variable such as temperature, for example, must be monitored to ensure that logic can be included in the control algorithm and an emergency action may be needed.
Discussing the research of graduation projects for students of the fifth stage
Written by عضو ارتباطUnder the patronage of Prof. Dr. Wissam Kazem Hamdan
Head of the Biomedical Engineering Department
In a sober and meticulous scientific atmosphere, the graduation research discussions were conducted
Today and in the classrooms, a discussion of the research of graduation projects for students of the fifth stage and for the morning and evening studies took place, where a number of scientific committees were formed from the professors of the department to manage this discussion sessions. before the committee
The members of the specialized committees discussed urging the students to try to complete as many projects as possible, taking into account the circumstances the students are going through. And directing them to address the problems they encountered during the research period and to develop solutions to the difficulties in the practical aspect.
Directing a warning penalty in accordance with the instructions for student discipline
Written by عضو ارتباطBased on the instructions for student discipline in institutions of higher education and scientific research, which states (the student shall be punished with a warning if he violates order, tranquility and tranquility in the university, college or institute) and with reference to the approval of the head of the department, Professor Dr.Wisam k.hamdan
their names For the morning study are listed below for their misconduct:
Zahraa Majid Mazhar
Tara Ali Farhan
Zaid Osama Abdul Amir
Dismissing a student and directing a warning penalty
Written by عضو ارتباطBased on Paragraph (Fourth) of Article (5) of the Student Discipline Instructions in Institutions of Higher Education and Scientific Research,
which states (The student shall be punished with temporary dismissal from the university for a period not exceeding one academic year if he uses violence against his fellow students, threatens them, or attempts to blackmail them with pictures, recordings, or any other means) and according to the approval of the Head of Department,
It was decided to expel the student Mahdi Raad - the first stage - the evening study for seven days.
More...
warning penalty to the student Hussein Yassin Youssef
Written by عضو ارتباطBased on Paragraph (Second) of Article (2) of the Student Discipline Instructions at the Higher Education and Scientific Research Institution No. 160 of 2007, which states:
(The student shall be punished with a warning if he offends the fellowship relations between students or transgresses his words against one of the students) and in reference to the approval of the department head on 4/28/22 on the minutes of the Student Discipline Committee
Accordingly, it was decided (to issue a warning penalty to the student Hussein Yassin Youssef - the first stage - the evening study).
According to the directives of the esteemed head of the department, Professor Dr. Wissam Kazem Hamdan,according to decision (20) of the Exam Instructions No. 134 of 2000 Watch states (If the student proves or attempts to cheat in the exams, he is considered a failure in all the subjects that repeat the year and if this is repeated, he will be separated From the institute or college, and they are bound by a certificate) and it is decided upon
The student (Hussain Shaker Ahmed Haider) failed - the fifth stage - the Bioinstruments branch in the morning study, after it was proven cheating in the final exams in the medical sensors.
Ph.D. Sabah Saad participated in the discussion committee of the doctoral student
Written by عضو ارتباط
The lecturer in the of Biomedical Engineering Department, Assistant Professor Dr. Sabah Saad, participated in the discussion committee of the doctoral student of the student
(Heba Abdul Amir Muhammad Rasan), where her thesis was discussed in the Department of Biotechnology, College of Science, University of Baghdad, her thesis tagged
"MicroRNA gene expression for Iraqi patients with colorectal cancer".
A scientific visit to Ibn Al-Haytham Hospital for Ophthalmology
Written by عضو ارتباط
Under the patronage of the Head of Departmentt, Ph.Dr. Wissam Kazem Hamdan, within the department’s scientific and introductory activities, a scientific visit was organized for the students of the fifth stage, the Medical Devices Branch, for the morning and evening studies to Ibn Al-Haytham Hospital for Ophthalmology. Dr. Hussain Jamil Mutashar, the Director of the Laboratories Division,. Dr. Ali Jalal, the engineer, Saja Bashir, and Ass.lec. Ali Mahmoud Issa, who in turn accompanied the students on this visit. In turn, the head of the department praised the director of Ibn Al-Haytham Eye Hospital for the great support for students and to facilitate this visit
The visit included receiving students from within the hospital staff, where they provided a detailed explanation of the available medical equipment, how to use it, and how to maintain it. The hospital is one of the largest centers of ophthalmology and surgery that includes multiple departments, including emergency and consulting clinics, in addition to specialized clinics such as the retina clinic, vitreous cutting, and pediatric ophthalmology. Strabismus, glaucoma, corneal diseases and surgery, eye plastic surgery, laser and LASIK correction of refractive errors.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
