Saad Mahmood Ali Salim Scientific rank: Ph.D. Degree and Consultant in Mechanical, Production, Manufacturing &Biomedical Engineering

1. Scientific Assistant to the Head of the Biomedical Engineering Department since 20/3/2019. And a member of the university committee to test the teaching efficiency of postgraduate graduates (Masters and PhD).

2. Director of the Scientific and Cultural Division in the Biomedical Engineering Department from 16/5/2018 until 20/3/2019.

Management of a number of factories, companies, engineering and industrial workshops in the private sector, 1979-2010. In the field of manufacturing, trade, contracting and contracting in various industrial and engineering sectors included:

•Designer and supervision engineer of production of a number of engineering plants 1979-1999.

•Designer and supervision engineer of production of a number of engineering plants 1979-1999.

•Director of Saidi engineering plant and office 2000-2004.

•Authorized director of the Moons Gulf company for general trading Ltd. and deputy authorized director of Al-Atheer General Contracting Co. 2000-2004.

•Technical Manager of the Alkenz company for concrete and cement industry / Baghdad 2005-2006 and 2012-2014.

• Technical director of Al-Shurook Road for Trading, Contracting, Industries, Engineering Services and Manufacturing of Productive Machines 2007-2010.

•Expert in the strategic industrial planning and in the preparation of strategic studies to improve the Iraqi economy and investment files and rehabilitation and modernization of the Iraqi industrial and technological reality, reconstruction and development of tracks, update objectives and address crisis and unemployed management.

•Member of the Iraqi strategy team for the preparation and writing of Iraqi industrial strategy for the years 2012-2030 with the consultants of the Iraqi Ministry of Industry and Minerals and the experts of the United Nations Industrial Development Organization "UNIDO", which was completed in Iraq, Turkey, Austria, Ireland and Tunisia during the period from May 2011 to April 2012.

Google Scholar Profile

Researcgate Profile

Web of Scince TM Profile

ORCID iD

scopus

•PhD Degree in Mechanical Engineering - Applied Engineering Mechanics - University of Technology - Mechanical Engineering Department – Iraq – Baghdad 2015. Thesis entitled “Experimental and Modeling Study on the Influence of Electrical Discharge Machining Parameters on the Surface Residual Stresses and Fatigue Life of Die Steel “.

•MSC. Degree in the Mechanical Engineering – Manufacturing Processing Engineering - University of Baghdad - Iraq – Baghdad 1994. Thesis entitled “Experimental Evaluation of The Explosive Welding Parameters for Different Plate Cladding Combinations ".

•BSC. Degree in Mechanical Engineering - Production Engineering - University of Technology – Production of Engineering and Metallurgy Department – Iraq – Baghdad 1990. Graduation project title” An investigation into the dynamic performance of cutting tools”.

My Research Applied Mechanics, Manufacturing , Workshops Technology. Advanced Manufacturing, Manufacturing of biomedical materials and devices , Theory of Machine, Design of Machines and biomedical devices and Design software (ANSYS and SOLIDWORKS), Industrial and Economic Studies.

1. Study on Near-Dry EDM Performance Characteristics of MSGNP/ Al-7075 Using Air, Argon, Nitrogen, and Ferron Dielectric Medium, Advances in Science and Technology Research Journal, submitted at 8/9/2023.

2. Experimental Investigation of Machining Parameters Using Hollow Electrode for Wet-EDM of MSGNP/ Al-7075 Nanoparticles Composites Produced by Stir Casting, under publication.

3. Comparison between the effect of adding MSGNP and B4C-WC nano particles on the metallurgical and mechanical characterization of Al-7075 composites produced by Stir casting, Engineering and Technology Journal, submitted at 18/8/2023.

4. Wireless system for monitoring the health of newborns in premature infants, 18th International Middle Eastern Simulation and Modelling Conference, Al-Farahidi University, submitted at 12/6/2023, accepted at 22/9/2023.

5. Design and Implementation of Orthodontic Stents to Repair Congenital Chest Wall Deformities and Pigeon Chest, 18th International Middle Eastern Simulation and Modelling Conference, Al-Farahidi University, submitted at 30/5/2023, accepted at 24/9/2023.

6. Design and Implementation of a Low-Cost Wearable Blood Oxygen Saturation and Pulse Measurement Device, 4th International Conference on Advance of Sustainable Engineering and its Application (ICASEA)2023, held on 10-11/5/2023, Accepted at 6/5/2023.

7. Design and Fabrication of Laryngoscope Prototype by using 3D Printing, 4th International Conference on Advance of Sustainable Engineering and its Application (ICASEA) 2023, held on 10-11/5/2023, Accepted at 6/5/2023.

8. Design of a New Generation Low-Cost Advanced Soft Nano-Artificial Heart for Permanent Use, 3rd International Conference on Nanoscience and Nanotechnology (UTNANO.ir), held in University of Tehran on 26/4/2023, Accepted at 6/5/2023.

9. Design and Modeling of a Lower Artificial Limb Adjustable Socket, 4th International Scientific Conference of Alkafeel University (ISCKU 2022), held on 20-21/12/2022, Submitted 24/9/2022, Accepted 20/10/2022, AIP Publication, Scopus, under publication.

10. Design and Implementation of an Electrical Muscle Stimulator for Clinically and Physical Treatment Application, 4th International Scientific Conference of Alkafeel University (ISCKU 2022), held on 20-21/12/2022, Submitted 16-9-2022, Accepted 8/11/ 2022, AIP Publication, Scopus, under publication.

11. Design and Fabricating of Continuous Passive Motion (CPM) Machine for a Physical Knee Pain Therapy, 4th International Scientific Conference of Alkafeel University (ISCKU 2022), held on 20-21/12/2022, Submitted 10/9/2022, Accepted 9/10/2022, AIP Publication, Scopus, under publication.

12. Design and ANSYS Simulation of Nano Artificial Heart Valves, International Journal of Engineering, submitted 2/4/2023, under publication.

13. Improved the Fatigue life and 3D Printing of Total Soft Artificial Hearts and Heart Valves, Iranian Journal of Materials Science and Engineering, ID:3235, submitted 23/4/2023, under publication.

14. Design and Fabrication of a Smart Heart Rate ECG monitoring system using LABVIEW, Journal of Healthcare Engineering, submitted 2/2/2023, under publication.

15. Design and Implementation of Ambulance Drone Prototype for Emergency Medical Deliveries, 6th International Conference on Engineering Sciences, held on 20-21/12/2022, submitted 15/10/2022, Accepted 8/12/2022, under publication.

16. Design and Fabrication of a Low-Cost Actuated Hand Orthosis for Rehabilitation Paralyzed Patients, 2nd International Conference on Advanced Engineering Science and Technology (AEST 2022) and IEEE, held on 20-21/12/2022, submitted 21/8/2022, Accepted 13/11/2022, under publication.

17. Design and Manufacturing of a Low-Cost Nonconventional Controlling Intelligent Prosthesis, International 17th Middle Eastern Simulation and Modelling Conference (MESM 2022), submitted 8/2/2022, Accepted at 27/4/2022, published at 20/12/2023, Scopus.

18. Design and Manufacturing of a Low-Cost Below- Knee Prosthesis Limb, Ingeniería E Investigación, submitted 12/9/2021, accepted at 23/5/2023, under publication.

19. Design Pediatric Occupational Therapy Device to Improve the Cognitive and Physical Capabilities, 6th International Conference on Engineering Sciences, submitted 15/10/2022, Accepted 8/12/2022, under publication.

20. “Design and Fabrication and of 3-Axes Mini CNC milling machine”, 1st International Conference on Sustainable Engineering and Technology (INTCSET2020) 15-16/12/2020 // IOP Conference Series: Materials Science and Engineering, Vol. 1094, pp. 1-13, 2021.

21. “Effects of Heat Treatment on the Corrosion and Mechanical Properties of Stainless Steel 316L as Used in Biomedical Applications”, 4th International Conference on Engineering Sciences - ICES 5- 6/12/2020 //IOP Conference Series: Materials Science and Engineering, Vol. 1067, pp. 1-18, 2021.

22. “Design of a Low-Cost Ventilator for the Breathing Respiratory Failure Patients due to Coronavirus Pandemic- COVID-19”,4th International Conference on Engineering Sciences - ICES 5- 6/12/2020 //IOP Conference Series: Materials Science and Engineering, Vol. 1067, pp. 1-26, 2021.

23. “Design and Fabrication of Nano-Fluidic Blood and Cancer Cells Separation and Purification Device”, 1st International Conference on Sustainable Engineering and Technology (INTCSET 2020) 15-16/12/2020 // IOP Conference Series: Materials Science and Engineering, Vol. 1094, pp. 1-14, 2021.

24. “ANSYS Modeling for Bone Reconstruction by Using Hybrid Nano-Bio Composite”, Journal of Solid Mechanics, Vol. 12, No. 4, 2020, pp. 774-790.

25. “The Effect of Electrical Discharge Machining (EDM) Total Heat Generated in on the White Layer Thickness (WLT) and Fatigue Life for Die Steel”, 3rd International Scientific Conference of Alkafeel University (ISCKU), 22-23 March 2021: Materials Science Forum, Vol. 1039, pp. 182-200, 20/7/2021.

26. “3D Model of Bone Scaffolds Based on the Mechanical Behaviour for a Hybrid Nano Bio composite”, Journal of Mechanical Engineering, Vol. 17, (2), pp. 45-67, 2020.

27. “Influence of Electrodes and Parameters on Micro-EDM Drilling Performances of 304L Stainless Steel” 2nd International Iraqi Conference on Engineering Technology and its Applications (2ndIICETA), 27-28, August 2019, Proceedings of the IEEE Xplore, pp 1-6, Feb/2020, DOI: 10.1109/IICETA47481.2019.9012975, 2020.

28. “Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology”, International Journal of Engineering -Transactions B: Applications. Vol. 32, No. 11, (November 2019), pp. 1516-1526.

29. “Design and Modeling of a Soft Artificial Heart by Using the SOLIDWORKS and ANSYS”, 3rd International Conference on Engineering Sciences, ICES.KU2019, Materials Science and Engineering: IOP Conference Series, Vol. 671, pp. 1-22, Jan. 2020.

30. “A bio-material for Scaffold Application: Thermal and Mechanical Propertied Analysis for PSZ-TiO2/HDPE System”, 3rd International Conference on Engineering Sciences, ICES.KU2019, Materials Science and Engineering: IOP Conference Series, Vol. 671, pp. 1-16, Jan. 2020.

31. “Modeling and Simulation for Mechanical Behavior of Modified Biocomposite for Scaffold Application”, Ingeniería E Investigación, Vol. 39 No. 1, 63-75, 2019.

32. “The effect of reinforced SiC on the mechanical properties of the fabricated hypoeutectic Al-Si alloy by centrifugal casting”, Engineering Science and Technology, an International Journal, “Elsevier Editorial System, Vol. 22, Issue 4, pp. 1125-1135, 1/10/2019.

33. “Promoting Strategy for Economic, Industrial and Technological Development in Iraq”, Democratic Arabic Center for Strategic, Political and Economic Studies, Berlin, Germany, International Journal of Economic Studies, Vol. 4, Nov. 2018.

34. “Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel”, Journal of Solid Mechanics - Vol.10, Issue 2. pp. 338-353, Sep. 2018.

35. “The Effect of SiC powder Mixing Electrical Discharge Machining (PMEDM) on Fatigue Life of AISI D2 Die Steel”, Engineering Science and Technology, an International Journal “Elsevier Editorial System” Vol.19, pp. 1400-1415, Sep. 2016.

36. “Effect of Electrical Discharge Machining and Shot Blast Peening Parameters on Fatigue Life of AISI D2 Die Steel”, Journal of Engineering, College of Engineering, University of Baghdad, Iraq Vol.22, issu 11, pp. 111-135, (2016).

37. “Studying and Modeling the Effect of Graphite Powder Mixing Electrical Discharge Machining on the Main Process Characteristics”, Al-Khwarizmi Engineering Journal, University of Baghdad, Vol. 11, No3, pp. 20-36 (2015).

38. “Prediction Models of Surface Roughness, Material Removal Rate and Tool Wear Ratio Models for SiC Powder Mixing EDM” Engineering and Development Journal, Al-Mustansiriya University, Vol.19, No.6, pp. 73-92c, Sep. 2015.

39. “Study the Effect of the Graphite Powder Mixing Electrical Discharge Machining on Creation of Surface Residual Stresses for AISI D2 Die Steel Using Design of Experiments”, Engineering and Technology Journal / University of Technology, Eng. &Tech. Journal, Vol.33, Part (A), No.6, pp. 1399-1415, 2015.

40. “Effect of SiC Powder Mixing (PMEDM) on Surface Residual Stresses Using Copper and Graphite Electrodes”, Elixir Mechanical Engineering International Journal, Vol. 80, pp. 30960-30967, 2015.

41. “Surface Residual Stresses Induced by Shot Blast Peening After EDM of AISI D2 Die Steel Using Two Types of Electrodes”, International Journal of Current Engineering and Technology (IJCET), Vol.5, No.1, pp. 227-234, Feb-2015.

42. “Effect of Different Types of Electrodes on Surface Residual Stresses Induced by EDM Process for AISI D2 Die Steel”, International Journal of Engineering Sciences & Research Technology (IJESRT), Vol. 4, pp. 703-712, Issue 1, January, 2015.

43. “Modeling the influence of EDM parameters on the process performances”, A book on Mechanical Engineering and Manufacturing Technology, Scholars' Press, Omni Scriptum GmbH & Co. KG, Germany, 2016.

1. Manufacturing Processes (I), Engineering Metallurgy managed the Workshops Technology and for Mechanical Engineering (1st class) - University of Karbala. 2007-2013.

2. Advanced Manufacturing Processes (II) for Mechanical Engineering (3rd class) - University of Karbala. 2010-2017.

3. Design of the Machines II and ANSYS design software for Mechanical Engineering (4th class) - University of Karbala. 2015-2017

4. Manufacturing Processes for Biomedical Engineering Department (2nd class). 2016-2018.

5. Design of medical devices (ANSYS and Solid works) Medical Systems Engineering Branch/ Controls and Systems Engineering Department (4th class). 2017-2023.

6. Theory of Machines and Vibrations for Mechatronics Engineering Branch/ Controls and Systems Engineering Department (3rd class). 2016-2019.

7. Biomaterials for Medical Systems Engineering Branch/ Controls and Systems Engineering Department (3rd class). 2016-2018.

8. Design of the Machines I, II and design software (ANSYS) for Mechatronics Engineering Branch/ Controls and Systems Engineering Department (4th class). 2016-2019.

9. Biomaterials Inspections for Department of Biomedical engineering (3rd class). 2017-2021.

10. Machines Design I, II and design software (ANSYS) for Biomedical Engineering Department (4th class)/ (Medical Instruments and Biomechanics Branches) – University of Technology. 2016-2023.

11. Engineering Statistics and Theory of Probabilities for Electrical engineering (2nd class). 2017-2018.

12. Design of Medical Devices and (ANSYS) software (class IV) for Biomedical Engineering Department (Medical Instruments and Biomechanics Branches), University of Technology, Iraq, Baghdad. 2017-2023.

13. Manufacturing and Calibration of Medical Devices (class IV) for Biomedical Engineering Department (Medical Instruments and Biomechanics Branches), University of Technology, Iraq, Baghdad. 2017-2023.

14. Nano mechanics (fifth stage)/ Department of Biomedical Engineering (Branch of Biomedical Devices) / University of Technology - Iraq - Baghdad. 2022-2023.

15. Supervising a number of graduation projects in the field of advanced manufacturing, applied mechanics and biomedical engineering in the Mechanical Engineering, Medical Systems Engineering and Biomedical Engineering Departments 2009-2023, some of which won first places in national exhibitions and competitions, and received a letter of thanks and appreciations to the President of the University of Technology.

1. Honored with a shield and medal from the first Iraqi inventor’s forum under the slogan "Our Scientists are our Pride", which was held by the Municipality of the Kufa Mosque, Alanwar Cultural Foundation and the independent media team, to which a group of scholars and inventors from various Iraqi universities, ministries, and institutions were invited on 7/13/2023.

2. Received the shield of the 3rd International Conference on Nanoscience and Nanotechnology (UTNANO.ir), held at the University of Tehran on 4/26/2023.

3. Obtaining the prize and medal of the Iraqi Science Day competition from the Minister of Higher Education and Scientific Research, according to the book of the Department of Research and Development / Department of Pioneering Project Management No. 15/1/2023 for supervising the second distinguished engineering graduation project on Iraq for the project entitled:

4. Won the first prize, the golden cup, and the creativity shield of the Bahr Aluloom Award for Creativity in its fourth session, for obtaining the first place in the field of medical sciences, according to its decision No. 205 on 12/17/2022.

5. Holds the patent entitled “Design of a Low-Cost Respiratory Ventilator for the Breathing Failure Patients due to Coronavirus Pandemic- COVID-19” International Classification E21F11/00, Application No. 268-2020, Patent No. 7728, Patent Grant Date 15/11/2022.

6. Holds the patent entitled “Design of a New Generation Low-Cost Advanced Soft Nano-Artificial Heart for Permanent Use” Application No. 417-2020, Patent No. 7441 on 5/7/2022. International Classification (ICS) No. A61K71/10.

7. Holds the patent entitled “Fabricating of a Nanoscale Device for Blood Purification from Corona Viruses and Microbes and Separating the Blood and cancer Cells”. International Classification A61K33 / 08, Application No. 257-2020, Patent No. 6545, Patent Grant Date 1/2/2021.

8. Won the first prize, a shield of creativity, a number of creativity necklaces, and a certificate of thanks and appreciation from the President of the University of Technology, the Dean of Al-Israa University College, and the President of the International Federation of Innovators in Iraq to participate in the second discussion workshop to introduce national elites and pioneering projects organized by the International Federation of Innovators in Iraq and the Ministry of Higher Education And the University of Technology and Israa University on 30/6/2021. Four patents and a pioneering project were subscribed, and the patent. Won the first prize entitled: Design of a New Generation Low-Cost Advanced Soft Nano-Artificial Heart for Permanent Use.

9. Recipient of the Golden Cup in the second innovation and technology competition (ITE2021), which was held at the University of Tehran, Islamic Republic of Iran, jointly with IEEE on 3/29/2021, to participate in the patent titled:

10. Obtaining the International Achievement Medal and Sash as the best researcher for the year 2019 from the RULA AWARDS & IJRULA Foundation for Global Research of the World Research Council WRC on 1/26/2020 on the occasion of India's Independence Day with permanent membership in the World Research Council and the United Medical Council for research entitled: “The effect of reinforced SiC on the mechanical properties of the fabricated hypoeutectic Al-Si alloy

11. Won the prize and medal of the Iraqi Science Day competition from the Minister of Higher Education and Scientific Research, according to the book of the Department of Research and Development / Department of Pioneering Project Management No. 6/216 on 12/1/2019 for supervising the first distinguished engineering graduation project on Iraq on 17/ 1/2020 for the project entitled: “Design and Fabrications of Blood Filtration, Plasma and Tumor Cells Separation Device".