Cinque Terre

Saad Mahmood Ali Salim

Faculty Member of Biomedical Engineering department

Lecturer Ph.D

This email address is being protected from spambots. You need JavaScript enabled to view it.

Saad Mahmood Ali Salim Scientific rank: Ph.D. Degree and Consultant in Mechanical, Production, Manufacturing &Biomedical Engineering

1. Scientific Assistant to the Head of the Biomedical Engineering Department since 20/3/2019. And a member of the university committee to test the teaching efficiency of postgraduate graduates (Masters and PhD).

2. Director of the Scientific and Cultural Division in the Biomedical Engineering Department from 16/5/2018 until 20/3/2019.

Management of a number of factories, companies, engineering and industrial workshops in the private sector, 1979-2010. In the field of manufacturing, trade, contracting and contracting in various industrial and engineering sectors included:

• Designer and supervision engineer of production of a number of engineering plants 1979-1999.

• Designer and supervision engineer of production of a number of engineering plants 1979-1999.

• Director of Saidi engineering plant and office 2000-2004.

• Authorized director of the Moons Gulf company for general trading Ltd. and deputy authorized director of Al-Atheer General Contracting Co. 2000-2004.

• Technical Manager of the Alkenz company for concrete and cement industry / Baghdad 2005-2006 and 2012-2014.

• Technical director of Al-Shurook Road for Trading, Contracting, Industries, Engineering Services and Manufacturing of Productive Machines 2007-2010.

•Expert in the strategic industrial planning and in the preparation of strategic studies to improve the Iraqi economy and investment files and rehabilitation and modernization of the Iraqi industrial and technological reality, reconstruction and development of tracks, update objectives and address crisis and unemployed management.

•Member of the Iraqi strategy team for the preparation and writing of Iraqi industrial strategy for the years 2012-2030 with the consultants of the Iraqi Ministry of Industry and Minerals and the experts of the United Nations Industrial Development Organization "UNIDO", which was completed in Iraq, Turkey, Austria, Ireland and Tunisia during the period from May 2011 to April 2012.

Google Scholar Profile

Researcgate Profile

Publons Profile

ORCID iD

scopus

•PhD Degree in Mechanical Engineering - Applied Engineering Mechanics - University of Technology - Mechanical Engineering Department – Iraq – Baghdad 2015. Thesis entitled “Experimental and Modeling Study on the Influence of Electrical Discharge Machining Parameters on the Surface Residual Stresses and Fatigue Life of Die Steel “.

•MSC. Degree in the Mechanical Engineering – Manufacturing Processing Engineering - University of Baghdad - Iraq – Baghdad 1994. Thesis entitled “Experimental Evaluation of The Explosive Welding Parameters for Different Plate Cladding Combinations ".

•BSC. Degree in Mechanical Engineering - Production Engineering - University of Technology – Production of Engineering and Metallurgy Department – Iraq – Baghdad 1990. Graduation project title” An investigation into the dynamic performance of cutting tools”.

My Research Applied Mechanics, Manufacturing , Workshops Technology. Advanced Manufacturing, Manufacturing of biomedical materials and devices , Theory of Machine, Design of Machines and biomedical devices and Design software (ANSYS and SOLIDWORKS), Industrial and Economic Studies.

1. “Modeling the influence of EDM parameters on the process performances”, A book on Mechanical Engineering and Manufacturing Technology, Scholars' Press, Omni Scriptum GmbH & Co. KG, Germany, 2016.
2 . “Effect of Different Types of Electrodes on Surface Residual Stresses Induced by EDM Process for AISI D2 Die Steel”, International Journal of Engineering Sciences &Publication books and papers Research Technology (IJESRT), Vol. 4, pp. 703-712, Issue 1, January, 2015.
3. “Surface Residual Stresses Induced by Shot Blast Peening After EDM of AISI D2 Die Steel Using Two Types of Electrode”, International Journal of Current Engineering and Technology (IJCET), Vol.5, No.1, pp. 227-234, Feb-2015. >
4. “Effect of SiC Powder Mixing (PMEDM) on Surface Residual Stresses Using Copper and Graphite Electrodes”, Elixir Mechanical Engineering International Journal, Vol. 80, pp. 30960-30967, 2015.
5 . “Study the Effect of the Graphite Powder Mixing Electrical Discharge Machining on Creation of Surface Residual Stresses for AISI D2 Die Steel Using Design of Experiments”, Engineering and Technology Journal / University of Technology, Eng. &Tech. Journal, Vol.33, Part (A), No.6, pp. 1399-1415, 2015.
6. “Prediction Models of Surface Roughness, Material Removal Rate and Tool Wear Ratio Models for SiC Powder Mixing EDM” Engineering and Development Journal, Al-Mustansiriya University, Vol.19, No.6, pp. 73-92c, Sep. 2015.
7. “Studying and Modeling the Effect of Graphite Powder Mixing Electrical Discharge Machining on the Main Process Characteristics”, Al-Khwarizmi Engineering Journal, University of Baghdad, Vol. 11, No3, pp. 20-36 (2015).
8. “The Effect of Electrical Discharge Machining (EDM) Total Heat Generated in on the White Layer Thickness (WLT) and Fatigue Life for Die Steel”, Journal of the Brazilian Society of Mechanical Sciences and Engineering– under publication.
9. “Effect of Electrical Discharge Machining and Shot Blast Peening Parameters on Fatigue Life of AISI D2 Die Steel”, Journal of Engineering, College of Engineering, University of Baghdad, Iraq Vol.22, issu 11, pp. 111-135, (2016).
10. “The Effect of SiC powder Mixing Electrical Discharge Machining (PMEDM) on Fatigue Life of AISI D2 Die Steel”, Engineering Science and Technology, an International Journal “Elsevier Editorial System” Vol.19, pp. 1400-1415, Sep. 2016. 11. “Fatigue Life of Graphite Powder Mixing Electrical Discharge Machining AISI D2 Tool Steel”, Journal of Solid Mechanics - Vol.10, Issue 2. pp. 338-353, Sep. 2018.
12. “Promoting Strategy for Economic, Industrial and Technological Development in Iraq”, Democratic Arabic Center for Strategic, Political and Economic Studies, Berlin, Germany, International Journal of Economic Studies, Vol. 4, Nov. 2018.
13. “Influence of Electrodes and Parameters on Micro-EDM Drilling Performances of 304L Stainless Steel”, Accepted, 2nd International Iraqi Conference on Engineering Technology and its Applications (2ndIICETA), at the Islamic University and IEEE, Accepted 27-28 August 2019, Scopus.
14. “The effect of reinforced SiC on the mechanical properties of the fabricated hypoeutectic Al-Si alloy by centrifugal casting”, Engineering Science and Technology, an International Journal, “Elsevier Editorial System, Vol. 22, Issue 4, pp. 1125-1135, August 2019.
15. “Modeling and Simulation for Mechanical Behavior of Modified Biocomposite for Scaffold Application”, Ingeniería E Investigación, Vol. 39 No. 1, 2019.
16 . “3D Model of Bone Scaffolds Based on the Mechanical Behaviour for a Hybrid Nano Biocomposite”, Journal of Mechanical Engineering, under publication. 17. “A bio-material for Scaffold Application: Thermal and Mechanical Propertied Analysis for PSZ-TiO2/HDPE System”, 3rd International Conference on Engineering Sciences, ICES.KU2019, Materials Science and Engineering: IOP Conference Series, Vol. 671, pp. 1-16, Jan. 2020. 18. “ANSYS Modeling for Bone Reconstruction by Using Hybrid Nano-Bio Composite”, Journal of Solid Mechanics under publication.
19. “Design and Modeling of a Soft Artificial Heart by Using the SOLIDWORKS and ANSYS”, 3rd International Conference on Engineering Sciences, ICES.KU2019, Materials Science and Engineering: IOP Conference Series, Vol. 671, pp. 1-21, Jan. 2020.
20. “Design and Fabrication of Nano-Fluidic Blood and Cancer Cells Separation and Purification Device”, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, under publication.
21. “Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology”, International Journal of Engineering -Transactions B: Applications. Vol. 32, No. 11, (November 2019), pp. 1516-1526.
22. Participation in the fourth international scientific conference on environment and sustainable development in Cairo/ Egypt on 24-28/10/2018, by a study titled: "Proposed Plan for Building a National Economy and an Advanced and Sustainable Industrial Sector in Iraq"
23. Participating in the Conference of Good Leadership and Economic Reform / Advisory Council at the Ministry of Higher Education and Scientific Research on 4/4/2018. The title of the study: “Strategy for Promoting Economic and Industrial Development and Technological Development in Iraq”, and holds a certificate of thanks and appreciation from the esteemed minister of higher education and scientific researches”.
24. Participate in the preparation of a proposed project at the Forum of the Cultural Center for the Popular Crowd with a study entitled "Strategy for the promotion of economic development and technological development in Iraq" on 8/4/2017.
25. Preparation of an initiative project to the “Iraqi industry workshop ... reality and challenges” with a study entitled "Strategy for the promotion of economic and industrial development and technological development in Iraq" on 30-9-2017.
26. Preparation of a proposed project entitled “Achieving the Sustainable Development Strategy in the Holy Province of Karbala”, presented to the center of Karbala for strategic studies and researches at the Holy Al-Husseiniya Threshold at 26/10/2014.
27. Preparation of a proposed project “Economic Reform Initiative”, submitted to the Council of Ministers on 13/7/2012.
28.Holds the certificate of "Strategic Industrial Planning for Sustainable Manufacturing Program", from the United Nations Industrial Development Organization (UNIDO) through a "strategic training program on strategic governance for sustainable industrialization", which was held in Iraq, Turkey, Austria, Ireland and Tunisia from May 2011 to April 2012 with the Iraqi Ministry of Industry and Minerals.
29. Preparation of an initiative submitted to the Ministry of Industry and Minerals on the "Study of the Reality of the Iraqi Industrial Sector and the Plan of Reconstruction and Development of its Tracks and Update its Objectives" on 24 - 9-2011.
30. Participated in the preparation of a scientific conference entitled "Highlights on the Industrial Reality in Iraq and Ways to Promote It" - Karbala University - College of Engineering - on 20/4/2010. Participated by the study entitled: "Study of the Iraqi Industrial Reality and the Plan to Reconstruct It and Develop its Tracks and Modernize its Objectives”.
31.Preparation of a study entitled "Towards Building a Real and Comprehensive Strategy to Promote the Industrial Reality of the Holy Province of Karbala" / Karbala Today newspaper / issue 132 / June 2008.
32. Participating in the Second Al-Sadiq University (A. S.) International Conference with the IEEE association on 10/11/2017, the search title “Optimization the Influence of Micro-EDM for 304L Stainless Steel Using Different Electrodes”.
33. Participation in the Sixth International Conference on Nanotechnology and Advanced Materials and their Applications at the Nanotechnology and Advanced Materials Research Center / University of Technology, 2-3 / 5/2018, the search title “Design and Fabrication of Blood Filtration, Plasma and Tumor Cells Separation Device”.
34. Participation in the Sixth International Conference on Nanotechnology and Advanced Materials and their Applications at the Nanotechnology and Advanced Materials Research Center / University of Technology, 2-3 / 5/2018, the search title “Design and Fabrication of Blood Filtration, Plasma and Tumor Cells Separation
Applied Mechanics, Manufacturing , Workshops Technology. Advanced Manufacturing, Manufacturing of biomedical materials and devices , Theory of Machine, Design of Machines and biomedical devices and Design software (ANSYS and SOLIDWORKS), Industrial and Economic Studies.
35.Applied Mechanics, Manufacturing , Workshops Technology. Advanced Manufacturing, Manufacturing of biomedical materials and devices , Theory of Machine, Design of Machines and biomedical devices and Design software (ANSYS and SOLIDWORKS), Industrial and Economic Studies.


• Manufacturing Processes, Engineering Metallurgy managed the Workshops Technology and for Mechanical Engineering (1st class) - University of Karbala. 2007-2012.

• Advanced Manufacturing Processes and Machines for Mechanical Engineering (3rd class) - University of Karbala. 2013-2017.

• Design of the Machines and design software (ANSYS) for Department of Biomedical Engineering (4th class) – University of Technology. 2016-2019.

• Engineering Statistics and Theory of Probabilities for Electrical Engineering (2nd class). 2017-2018.

• Design of Medical Devices and (ANSYS) software (class IV) for Biomedical Engineering Department (Medical Instruments and Biomechanics Branches), University of Technology, Iraq, Baghdad. 2017-2019.

• Design of Medical Devices and (ANSYS) software (class IV) for Biomedical Engineering Department (Medical Instruments and Biomechanics Branches), University of Technology, Iraq, Baghdad. 2017-2019.

• Design of the Machines II and ANSYS design software for Mechanical Engineering (4th class) - University of Karbala. 2012-2017.• Manufacturing Processes for Department of Biomedical Engineering (2nd class). 2016-2019.

• Theory of Machines and Vibrations for Mechatronics Controls and Systems Engineering (3rd class). 2016-2019

•Biomaterials for Medical Systems Engineering (3rd class). 2017-2018.

• Theory of Machines and Vibrations for Mechatronics Controls and Systems Engineering (3rd class). 2016-2019

• Thanks, and appreciate book from the President of the University of Technology No. 6046 on 16/5/2019 for the efforts exerted in evaluating the projects of the students of the fourth stage in the Department of Biomedical Engineering and winning the second and third projects with a month grants book.

•100000 dinars reward from the head of the Department of Engineering Control and Systems / University of Technology No. 486 on 4/4/2019 for the efforts in teaching students of the department.

•Awarded 250,000 dinars from the President of the University of Technology No. 851 on 7/2/2019 for efforts to receive medical devices from the of Medicine City.

• Thanks, and appreciate book from the Chairman of the Department of Biomedical Engineering / Technological University No. 43 on 9/1/2019 for the efforts made in preparation for the first national conference of Iraqi universities, which was held at Baghdad International Fair for the period 3-6/12/2018.

•Thanks, and appreciate book from the Assistant President of the University of Technology for Scientific Affairs and Graduate Studies No. 1932 on 16/12/2018 for the efforts made in the success of the first national conference of Iraqi universities, which was held at Baghdad International Fair for the period 3-6/12/2018.

• Thanks, and appreciate book from the Chairman of the Department of Engineering Control and Systems / University of Technology No. 1643 on 12/12/2018 for the efforts exerted in teaching the students of the department.

•T hanks, and appreciate book from the President of the University of Technology No. 10895 on 12/11/2018 for the efforts made in the success of the work of the examination committee with a month grants book.

•Thank, and appreciate book from the Prime Minister Dr. Adel Abdul Mahdi No. 1932 on 13/10/2018 to take care and contribute to building our country and serve our people.

•Thanks, and appreciate book from the Chairman of the Department of Medical Engineering Life / University of Technology No. 408 on 19/9/2018 for the efforts made in the success of the work of the examination committee in the section.

• Thanks, and appreciate book from the President of the University of Technology No. 4886 on 29/5/2018 for the efforts made in the success of the sixth scientific exhibition which was held on 7/5/2018 with a month grants book.

• Thank and appreciate book from the Chairman of the Department of Engineering Control and Systems / University of Technology No. 676 on 17/5/2018 for the efforts made in the success of the sixth scientific exhibition which was held on 7/5/2018.

•A certificate of thanks and appreciation from the Minister of Higher Education and Scientific Research to participate in the Conference of Good Leadership and Economic Reform / Supervisory and Scientific Assessment of the Ministry of Higher Education and Scientific Research on 4/4/2018. Title of the study: Strategy for the promotion of the economic, industrial and development and technological development in Iraq.

• Thank and appreciate book from the Head of the Department of Engineering of Control and Systems / University of Technology No. 677 on 19/6/2017 for the teaching efforts in the department.

• A certificate of thanks and appreciation from the People's Cultural Center on 8/4/2017 to present a study on "the strategy of promoting economic development and technological development in Iraq.

• Thank and appreciate book from the Dean of the College of Engineering / University of Karbala No. 1451 on 4/4/2017 for the efforts exerted in the Department of Mechanical Engineering.

• Thank and appreciate book from the Chairman of the Department of Engineering of Control and Systems / University of Technology No. 144 in 1/2/2017 for efforts in the development of methodological courses and materials teaching in the branch of engineering control of medical systems.

•Thank and appreciate book from the Dean of the College of Engineering / Karbala University, No. 2101 on 8/6/2016 for the efforts in the preparation and publication of a scientific book at the German firm Scholars Press.

• Thank and appreciate book from the Dean of the College of Engineering / Karbala University No. 2040 on 2/6/2016 for efforts to publish a scientific research in the Journal of Engineering Science and International Technology.

• Thank and appreciate book from the Dean of the College of Engineering / Karbala University, 1864 on 17/5/2016 for the efforts exerted in supporting the website in the College and raising the articles and lectures.

• Thank and appreciate book from the Dean of the College of Engineering / Karbala University, No. 1865, on 17/5/2016 for the efforts exerted in supporting the website in the college and raising the articles and lectures.

• Thank and appreciate book from the Dean of the College of Engineering / University of Karbala No. 1448 on 14/4/2016 for the efforts in supporting the website in the College and the raising of articles and lectures.

• Thank and appreciate book from the Dean of the College of Engineering / University of Karbala No. 1290 on 6/4/2016 for the efforts exerted to contribute actively to support the charity market festival to support the popular popular crowd.

• Thank and appreciate book from the Dean of the College of Engineering / Karbala University No. 205 on 7/1/2016 for the efforts exerted in supporting the website in the college and raising the articles and lectures.

• llege and raising the articles and lectures. • Thank and appreciate book from the President of the University of Karbala No. 134 on 5/1/2014 for the efforts exerted in the preparation of the strategy of developing the industrial sector until 2030 with a month grants book

• Thank and appreciate book from the Dean of the College of Engineering / Karbala University No. 3395 on 30/12/2014 for the outstanding efforts in the success of the First International Conference on Applications of Engineering Sciences.

• Thank and appreciate book from the Minister of Industry and Minerals No. 61953 on 16/12/2013 for the efforts exerted in preparing the strategy for the development of the industrial sector until 2030.

• Thank and appreciate book from the Presidency of the University of Karbala No. 6909 on 15/6/2010 for the efforts to give lectures to the scientific symposium on the industrial reality in Iraq and ways to promote it on 20/4/2010 with a month grants book.

• Thank and appreciate book from the Presidency of the University of Karbala No. 6197 on 31/5/2010 for the efforts made in the Preparatory Committee for the scientific symposium on the industrial reality in Iraq and ways to promote it on 20/4/2010 with a month grants book.

•Thank and appreciate book from the Dean of the College of Engineering / Karbala University No. 704 on 21/4/2009 on the preparation, preparation and preparation of laboratories and workshops.

Presenting a reward from the Director of the Institute of Liberation for the Joining of materials No. 616 on 13/11/1993 in appreciation of the sincere efforts and good results achieved in the study of explosive welding.

• Thank and appreciate book from the General Company for Electrical Industries No. 1661 on 11/3/1979 for the efforts exerted in opening the complicated spiral teeth gears by milling operations.

Top