اخبار القسم en
The lecturer, Dr. Marwan Nafi 'Ali, in the Biomedical Engineering Department at the University of Technology, received the academic promotion at the rank of Assistant Professor based on the University Order No. 510 on 27/11/2019.
He congratulated the Department Presidency Assistant Professor Dr. Marwan Nafi Ali for obtaining a scientific upgrade as it was aimed at raising the academic level in the department and the university and encouraging faculty members towards scientific research and publishing scientific research in solid international scientific journals.
The scientific assistant of the Department of Biomedical Engineering, Dr. Saad Mahmoud, Professor Dr. said that this achievement adds to the scientific achievements of our university, which gives a steady step towards development, progress and advancement in the service of our dear country.
Lecturer in Biomedical Engineering published scientific research on improving responses to centrifugal casting parameters in a discreet international journa
Written by عضو ارتباطDr. Saad Mahmoud Ali, the scientific assistant and in charge of the Head of Biomedical Engineering Department at the University of Technology, published a scientific research in International Journal of Engineering, )SCOPUS), entitled " Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology ".
The research was published in Vol. (32) and Issue (11) issued /November. The researcher showed that the process of centrifugal casting is one of the most important branches of advanced casting and considered as the fastest and most economical process to produce high-quality and high-density castings that are used in the manufacture of parts of high-strength medical device, in medical dental industry, gears, in the engine of jet aircraft, cars, jewelry and others.
The research was accomplished through the manufacture of two vertical and horizontal machines for low cost centrifugal casting with key accessories, analysis and improvement of experimental results using statistical software "Expert Design 11" and the Response Surface Methodology (RSM). The results showed better surface quality, increased the used stress values and reduced percentage elongation compared with gravitational casting.
Biomedical Engineering Department holds a scientific lecture on the news coverage of the professor's activity in the academic institution
Written by عضو ارتباطThe Biomedical Engineering Department holds a scientific lecture on the news coverage of the professor's activity in the academic institution:
Department of Biomedical Engineering at the University of Technology held a scientific lecture under the title (news coverage of the activity of university professor in the academic institution delivered by assistant teacher Sari Tahsin Rishan amid the presence of a large part of the faculty members in the department.
The lecture resulted in the possibility of employing the activities of the university professor during the academic year, whether from the process of holding scientific lectures or publishing research or participation in seminars and scientific conferences, in addition to receiving many awards, certificates and certificates during his scientific contributions.
The lecture focused on how and the steps to be followed by the university professor by providing the media responsible for the dissemination of activity in the academic institution by sending information as quickly as possible in order to maintain the novelty and value of the news of the professor activity.
Research entitled"The Techniques of distribute sources of financing long-term investments between the state and oil-producing companies: the experience of Russia and Iraq
Written by عضو ارتباطAssistant lecture in biomedical engineering department ali fadhl buewi was published Research entitled"The Techniques of distribute sources of financing long-term investments between the state and oil-producing companies: the experience of Russia and Iraq in the International Journal of Advanced Science and Technology
The research Abstract
It should be noted that in most countries of the modern world the subsoil belongs to the people (government, state, sovereign) - one of the few, although striking exceptions, is the United States, where some of the subsoil is privatized. The participation of oil producing corporations in the market is usually carried out based on a license for the development of mineral resources, or on the basis of production sharing agreements (PSAs).
The difference between the models of such participation is that in the first case, corporations pay fiscal or fixed cash payments for the use of subsoil resources, in the second, they transfer part of the extracted oil to state ownership [1].
In the Russian Federation, both main mechanisms for the distribution of capital and ownership of oil in the oil and gas market are applied. A similar approach is characteristic of many Western states, although the following global trend is taking place: in countries, even the most developed, democratic ones, whose socio-economic development largely depends on oil and gas revenues, states seek either to monopolize oil and gas production, or to maximize state participation and control in this area, combining such a task with ensuring the highest possible revenue differential rent at the expense of the state.
link of the journal and research http://sersc.org/journals/index.php/IJAST/article/view/1309
The students of the Biomedical Engineering Department of at the University of Technology participated in a scientific training trip to a Romanian country, which lasted for a week to develop the students' capabilities in the field of application and use of advanced medical devices in the laboratories of Romanian universities, most notably the Polytechnic University in Bucharest.
The students who participated in the scientific training trip from the Department of Biomedical Engineering were the students Mina waleed , Ibrahim Abdul Jabbar and Ahmed Akram, where the training was within a week on the equipment in the university laboratories, especially in the field of education systems, energy and electronic.
The students expressed their great joy at receiving a warm welcome from Dr. Sabah, Cultural Attaché Officer at the Iraqi Embassy in Romania, on the one hand, as well as their satisfaction with giving them the department and university this precious opportunity, which will be a key reason in the development of their capabilities in practical success between the theoretical and practical side
Prof.Dr Jinan Star Khashan obtained the scientific promotion professorship
Written by عضو ارتباطProf.Dr Jinan Star Khashan , in the Biomedical Engineering Department of , University of Technology, obtained the scientific promotion professorship based on the decision of the University Council in its first open meeting held on (1 and 6/10/2019).
The presidency of the Department congratulated Prof. Dr. Janan Star Khashan for obtaining the scientific promotion as it aims to raise the academic level in the department and university and encourage faculty members towards scientific research and publish scientific research in sober scientific journals.
The head of the Department of Biomedical Engineering Prof. Dr. Wissam Kazim Hamdan said that this achievement is in addition to the scientific achievements of our university giving urging steady pace towards development, progress and progress in the service of our dear country.
Visit of a delegation to the Biomedical Engineering Department
Written by عضو ارتباطOn the sidelines of the second session of the Conference of Materials Engineering and Science Icon MEAS, which hosts and contributes to the organization of the University of Technology, the Department of Biomedical Engineering hosted Dr. Omar Jabbar Daham Director of the Conference and Dr. Alaa Jabr Director of the Department of Scientific Affairs and Cultural Relations and Prof. Dr. Ivan Tariq Salem Member Foreign Prof. and Prof. Dr. Uda Hashim, Assistant Rector for Scientific Affairs at Uni Map University - Malaysia, and one speaker (Key note speaker) at the conference were discussed ways of scientific and academic cooperation with The head of biomedical engineering department Ph. Dr. Wissam Dr. Kazem Hamdan, in the presence of the scientific assistant Prof. Dr. Saad Mahmoud, the head of the Medical Devices Branch, Dr. Marwan Nafie Ali and the Director of the Scientific and Cultural Division in the department, Dr. Saba Tariq.
.jpg)
Calibration and correction of an artificial limb
Written by عضو ارتباطCalibration and correction of an artificial limb for one patient and the limb works with the Pneumatic and hydraulic systems. Note that the calibration has been done through a special application of smart phones. The process of calibration and testing for patient done in the department with the presence and supervision of the head of the department Ph. Dr.Wisam kazim hamdan and The head of the Bio instrumentation Medical Devices Branch is Dr. Marwan Nafie Ali and the Director of the Warith CenterFor prosthetics Ph.Dr. Yasser Sobeih.
Published a research in the Journal of Materials Science and Engineering
Written by عضو ارتباطPh. Dr. Saad Mahmoud, Associate Scientific Assistant in the Department, receives the acceptance of the publication of the research entitled “Design and Modeling of a Soft Artificial Heart by Using the SOLIDWORKS and ANSYS,”
He was invited to attend the 3rd International Engineering Science Conference At the Faculty of Engineering / Karbala University KU2019.ICES and publication in the journal of Containers Scoops Journal of Material Sciences and Engineering: IOP , Conference Series.
Published a paper in the Journal of Materials Science and Engineering
Written by عضو ارتباطPh. Dr. Saad Mahmoud, Associate Scientific Assistant in the Department, receives the acceptance of the publication of the research entitled "A“ bio-material for Scaffold Application: Thermal and Mechanical Propertied Analysis for PSZ-TiO2/HDPE System”,
Where he was invited to attend and deliver the research in the third international conference of engineering sciences held in the college of engineering / university of karbala KU2019.ICES
The research was published in the Journal of Materials Science and Engineering, which is a container of scopus.
More...
PH. Dr. Saad Mahmoud Ali published a research entitled "Influence of “Electrodes and Parameters on Micro-EDM Drilling Performances of 304L Stainless Steel"
The meeting was held at the Second International Conference on Technology and Engineering Applications at the Islamic University of Najaf / KU2019.ICES in partnership with IEEE.
Ph.Dr. Saad mahmood ali teaching in our department received a book of thanks and appreciation from the President of the University of Technology Ph. Dr. Imad Hussein Merzah AlHusseini esteemed for the efforts made by her in the publication of scientific research in containers Claravit within the initiative of (250 scientific research for publication sober for the year 2018-2019) wishing her more tender to serve our university and our beloved Iraq.
Ph.Dr saad mahmood ali has been published paper in International conference 2018/9/12 Journal of Engineering - Transactions Clarivate journal list &scopus title: "Optimization of Centrifugal Casting Parameters of AlSi Alloy by using the Response Surface Methodology (RSM)".
The Head op department Ph.Dr Wissam Kazim Hamdan has been published paper in International conference on materials engineering and science paper title: Effect of single point incremental forming parameters on spring Back and micro -crack density.
