اخبار القسم en
The Biomedical engineering department holds a workshop entitled (Dental workshop)Written by عضو ارتباط
Under the auspices of the Head of the Department, Prof. Dr. Wissam Kazem Hamdan,a workshop was held by the lecturer, Dr. (Mohammed Hassan Bashit), who is affiliated with the Baghdad Health Department in the Department of Engineering Projects, in the presence of the department’s academic staff and students on Thursday 11-24-2022. The workshop curriculum included each of :-
1- General view for dental instruments.
2- Guide installation for dental chair.
3- Modern technologies which are used in dental application.
4-basic maintenance principles for dental equipment.
A lecturer in the department obtains the patent tagged "Design of a low-cost respirator for patients with respiratory failure due to the Corona virus-Covid-19 pandemic"Written by عضو ارتباط
Ph.Dr.saad mahmood Ali in our department / Head of the Biomechanics Branch obtained
the patent tagged "Design of a low-cost respirator for patients with respiratory failure due to the Corona virus-Covid-19 pandemic"
The patent focused on designing two new, simple, low-weight and cost-effective models for a portable mechanical pneumatic respirator that operates with minimum oxygen consumption to help the increasing number of patients infected with the COVID-19 pandemic. Device performance using expert systems software 11.0.In cases of injured patients, Oxygen can be used as a programmable device and other safety devices that can be controlled. 2003 and the device is able to treat patients of all ages ,From the newborn baby to the elderly. The device operates at a range of 10-40 breaths/min. And between 4.04 to 64.64 liters / minute for patients with severe breathing difficulty infected with coronaviruses or other respiratory diseases, and the designed ventilator can work to consume the amount of oxygen supplied for a long period of time using any concentration of oxygen in the oxygenated breathing gas (FIO2 ), at least 42% higher than similar previous designed or standard ventilators.
Ph.Dr.Ali jalal ali receives a letter of thanks and appreciation from Al-Mustaqbal University CollegeWritten by عضو ارتباط
Prof. Dr. Ali Jalal Ali, a lecturer in Biomedical Engineering Department , received a letter of thanks and appreciation from the Future University College. Our appreciation for the efforts made by him
By contributing to the convening and success of the scientific workshop, which was held at the University of Technology for students of the Department of Life Medicine Engineering - University of Babylon, wishing him more brilliance and success to serve the scientific process in our country.
A scientific lecture on biomedicine given by innovative students in biomedical engineering departmentWritten by عضو ارتباط
Within the scientific activities of Biomedical Engineering department students with the support of the head of the department, Dr. Wissam Kazem Hamdan, in building and developing the skills of innovative students
In this regard, the student (Hassan Tahseen) and the student (Mustafa Rashid) presented a distinguished scientific lecture in the field of life medicine on the topic of integrating and employing artificial intelligence in the field of life medicine. The students were honored with a certificate of appreciation from the Future College, wishing them more creativity and progress Scientific.
Ph.Dr.saad mahmood obtains the patent tagged "design of a flexible nano-artificial heart for permanent use"Written by عضو ارتباط
Prof. Dr. Saad Mahmoud Ali, The Head of Biomechanics Branch in Biomedical engineering Department , obtained the patent entitled “Design of a Soft Nano-Artificial Heart for Permanent Use.”
Where the patent focused on the development, design, modeling and analysis of a new generation of flexible artificial hearts, at low cost, easily operable, real size, low energy consumption, and high durability to replace the living heart of the patient permanently and not for a limited time as current artificial hearts work. Numerical simulations and investigations were carried out using SOLIDWORKS 17 and ANSYS 15.7 design software.
Multi-Physics Structural Analytical Systems, Fluent Fluid Flow Analysis (CFX) and (CFD) systems to determine the dynamic response of blood and compressed air on the elastic performance of the heart during active blood flow cycles. Biomechanical modeling and performance analysis of the flexible artificial heart were carried out using finite element software and ANSYS R18.0 software. Design Expert 11.0 software and Response Surface Technology (RSM) were also used to validate and improve the biomechanical performance of the newly designed flexible core.The simulation results showed that during the maximum absolute pressure applied to the ventricles and air pressure chambers, the heart's performance is completely safe, as shown by the animated graphs. The results also showed that the stress energy, total deformation, maximum main elastic stress, stress-fatigue safety modulus and fatigue life reached their optimal values.
Biomedical engineering department students participate in an international conferenceWritten by عضو ارتباط
Under the supervision of the Head of the Biomedical Engineering Department Dr.wisam kazem hamdan and Ph. Dr. Saad Mahmoud Ali, a group of students from the Biomedical Engineering Department participated in an international conference and obtained approval to publish the research in a journal from Scopus Containers.
The research dealt with the study and discussion of current issues related to components, designs, manufacturing and processing methods of a continuous passive motion machine (CPM). Review and study of the latest research and studies related to continuous passive motion machine (CPM) design and related study of lower extremity diseases, advantages and complications of the operation. The design, development, and manufacture of a simple, lightweight continuous passive motion (CPM) machine was implemented as an effective way to help relieve knee pain through physical therapy. The design and manufacture of many parts of the machine involved the use of ANSYS 18.0 mechanical design software.
The design and manufacture of many parts of the machine involved the use of ANSYS 18.0 mechanical design software. 3D printing was carried out. The efficiency of the productive device (CPM) with the three speeds provided by the device has been tested and checked on many patients paralyzed due to strokes, risks after knee surgery and severe pain in the lower extremities. The device has been shown to be of great help to patients in reducing pain, the risk of DVT after knee surgery in increasing the range of motion of the joint, and decreasing the length of hospital stay.
The Head of the Biomedical Engineering Department participated in the discussion of a postgraduate studentWritten by عضو ارتباط
Prof. Dr. Wissam Kazem Hamdan - Head of the Biomedical Engineering Department participated in the discussion of a postgraduate student with his tagged thesis
" Empirical and simulated investigations of the dynamic, biological properties of the Bop-Ceramic system used as Orthopedic materials"
Where the discussion committee was chaired by Prof. Dr. Nabil Kazem Abdel Sahib at Al-Nahrain University - College of Engineering - Biomedical Engineering Department
The discussion concluded with the student obtaining an honors degree, wishing him further success and excellence.
Ph. Dr. Raed Saleh Jawad received the silver medal for his participation with a patent in the work of the Fifth Exhibition of Patents and Industrial Models of the Ministry of Industry and Minerals 2022Written by عضو ارتباط
Ph. Dr. Raed Saleh Jawad received the silver medal for his participation with a patent in the work of the Fifth Exhibition of Patents and Industrial Models of the Ministry of Industry and Minerals 2022, which was held at the headquarters of the Industrial Research and Development Authority 9-11-2022, wishing him more success and excellence in service for our beloved country.
The Biomedical Engineering Department held a workshop on the Ct scanWritten by عضو ارتباط
Under the patronage of the Head of the Biomedical Engineering Department, Ph.Dr.wisam kazem hamdan , The Biomedical Engineering Department held an introductory workshop on the Ct scan, delivered by the engineer (Ahmed Taha Ahmed Al-Jubouri), the official of the laboratory division in the department, Ph. Dr. ( Ali Galal).
It was held in the auditorium of the Civil Engineering Department, in the presence of the teaching staff, from among the students
Showing pictures showing the shape of the device and explaining its physical characteristics and its importance in detecting diseases. The subject was described through questions from the audience, and all questions were answered by the engineer. Ahmed Taha
Biomedical Engineering Department.
An engineer in the department holds a master's degree in the Biomedical Engineering Department - Al-Nahrain UniversityWritten by عضو ارتباط
The engineer Marwa Jamal Muhammad, received an honors degree in the Master of Biomedical Engineering with her tagged thesis:
(DESIGN AND EVALUATION OF PROSTHETIC LIMB OSSEOINTEGRATION IMPLANTABLE ADAPTER)
Where her thesis dealt with the design and evaluation of implantable transformed prosthetic limbs and under the supervision of Prof. Dr. Marwan Nafeh Ali, the student's discussion was held in the Board Room of the Biomedical Engineering Department / College of Engineering / Al-Nahrain University. We wish her more scientific success.
Ph.Dr.Enas saad participates in a symposium at the Iraqi University entitled "Modern Means of Criminal Obstacles"Written by عضو ارتباط
Ph. Dr. Enas Saad, in biomedical engineering department, participated in a symposium entitled "Modern Means of Criminal Obstacles", which was held at the Iraqi University in the College of Law and Political Science - Law Department, on Thursday, 11-3-2022, in the presence of Ph.Dr. Nour Saad Muhammad and a number of the teaching staff and students, the symposium dealt with the importance of DNA and other types of albums and focused on the importance of DNA in criminal Spanish globally and in the Arab world and an attempt to make it a proof and not a local equivalent. The symposium dealt with mentioning the legal aspects of the subject.
Prof. Dr. Marwan Nafie Ali participated in the doctoral discussion committee in College of Dentistry / University of BaghdadWritten by عضو ارتباط
Prof. Dr. Marwan Nafie Ali in biomedical engineering department participated in the discussion committee of the doctoral student (Ali waleed hadi)
Investigations into the structural characterization of a magnetic mnemonic CO-Ni-AI alloy in an effort to develop a root filler coolant. in the College of Dentistry / University of Baghdad as part of the requirements for obtaining a doctorate degree in dental treatment. The thesis was successfully approved.
The head of department participated in the doctoral discussion committee in College of Dentistry / University of BaghdadtWritten by عضو ارتباط
The head of the department Ph.Dr. wisam kazem hamdan participated in the discussion committee of the doctoral student (Ali saad hasan)
Change the design of three different rotary root fillers in the College of Dentistry / University of Baghdad as part of the requirements for obtaining a doctorate degree in dental treatment. The thesis was successfully approved.