اخبار القسم en
a lecture entitled "Educational Bag - Writing and Structuring the Curriculum"
Written by عضو ارتباطThe Division of Quality Assurance and University Performance in the Biomedical engineering Department organized a lecture entitled "Educational Bag - Writing and Structuring the Curriculum" given by Prof. Dr. Marwan Nafie Ali, where the lecture dealt with the advantages of educational bags and the start of educational systems in providing them in an appropriate way to develop the educational process And make it more flexible to enhance self-education and evaluate the student in an accurate and more effective way. It touched on the three most important components of the educational package, which center around (the guide, teaching activities, and evaluation).
workshop on the experiments of the (MEMS) laboratory
Written by عضو ارتباطUnder the auspices of the Head of the Department, Prof. Dr. Wissam Kazem Hamdan, and with the aim of increasing the scientific activities of students, the biomedical engineering department held a workshop on the experiments of the (MEMS) laboratory, which was given by Ph.Dr. (Ali Jalal Ali) and Engineer (Mohammed Barzan Hassan) to students of the fourth stage of the Medical Devices Branch to learn about the techniques Scientific experiments for the laboratory.
The Biomedical engineering Department organized an awareness seminar entitled "The Importance and Knowledge of University Life" Delivered by Dr. (Ali Manea)
Written by عضو ارتباطThe Biomedical engineering Department at the University of Technology and under the auspices of the Head of the Department, Professor Dr. Wissam Kazem Hamdan, organized an awareness seminar entitled "The Importance and Knowledge of University Life"
Delivered by Dr. (Ali Manea), where the symposium dealt with introducing students of primary studies to the right of a professor over a student and how to form relationships within the university environment and touched on choosing the appropriate classmates in the study and the need for scientific creativity and progress in addition to guiding students and encouraging them to transfer successful experiences in their undergraduate level to their new colleagues and students The first stage .
The head of the Biomedical Engineering Department welcomes the first-stage students for the academic year 2022-2023
Written by عضو ارتباطA festive atmosphere in the Biomedical Engineering halls. under the auspices of the head of department Prof. Dr. Wissam Kazem Hamdan, organized a group of volunteer students to celebrate the start of the new academic year.
For first-stage students for the academic year 2022-2023, where the President of Life Medicine Engineering welcomed the new students and urged them to persevere and be serious, as well as adhere to the laws and instructions in force, and consider the university as their second home
During which the department was identified, its courses, laboratories, and other academic and scientific matters, and the students were also introduced to the university laws that the student must abide by.
It also concluded by emphasizing the need to commit to persevering with excellence and diligence to complete the education process in a manner commensurate with the appropriate level for this lofty profession to serve the community and the nation.
The Biomedical engineering department holds a workshop entitled (Dental workshop)
Written by عضو ارتباطUnder the auspices of the Head of the Department, Prof. Dr. Wissam Kazem Hamdan,a workshop was held by the lecturer, Dr. (Mohammed Hassan Bashit), who is affiliated with the Baghdad Health Department in the Department of Engineering Projects, in the presence of the department’s academic staff and students on Thursday 11-24-2022. The workshop curriculum included each of :-
1- General view for dental instruments.
2- Guide installation for dental chair.
3- Modern technologies which are used in dental application.
4-basic maintenance principles for dental equipment.
A lecturer in the department obtains the patent tagged "Design of a low-cost respirator for patients with respiratory failure due to the Corona virus-Covid-19 pandemic"
Written by عضو ارتباطPh.Dr.saad mahmood Ali in our department / Head of the Biomechanics Branch obtained
the patent tagged "Design of a low-cost respirator for patients with respiratory failure due to the Corona virus-Covid-19 pandemic"
The patent focused on designing two new, simple, low-weight and cost-effective models for a portable mechanical pneumatic respirator that operates with minimum oxygen consumption to help the increasing number of patients infected with the COVID-19 pandemic. Device performance using expert systems software 11.0.In cases of injured patients, Oxygen can be used as a programmable device and other safety devices that can be controlled. 2003 and the device is able to treat patients of all ages ,From the newborn baby to the elderly. The device operates at a range of 10-40 breaths/min. And between 4.04 to 64.64 liters / minute for patients with severe breathing difficulty infected with coronaviruses or other respiratory diseases, and the designed ventilator can work to consume the amount of oxygen supplied for a long period of time using any concentration of oxygen in the oxygenated breathing gas (FIO2 ), at least 42% higher than similar previous designed or standard ventilators.
Ph.Dr.Ali jalal ali receives a letter of thanks and appreciation from Al-Mustaqbal University College
Written by عضو ارتباطProf. Dr. Ali Jalal Ali, a lecturer in Biomedical Engineering Department , received a letter of thanks and appreciation from the Future University College. Our appreciation for the efforts made by him
By contributing to the convening and success of the scientific workshop, which was held at the University of Technology for students of the Department of Life Medicine Engineering - University of Babylon, wishing him more brilliance and success to serve the scientific process in our country.
A scientific lecture on biomedicine given by innovative students in biomedical engineering department
Written by عضو ارتباطWithin the scientific activities of Biomedical Engineering department students with the support of the head of the department, Dr. Wissam Kazem Hamdan, in building and developing the skills of innovative students
In this regard, the student (Hassan Tahseen) and the student (Mustafa Rashid) presented a distinguished scientific lecture in the field of life medicine on the topic of integrating and employing artificial intelligence in the field of life medicine. The students were honored with a certificate of appreciation from the Future College, wishing them more creativity and progress Scientific.
Ph.Dr.saad mahmood obtains the patent tagged "design of a flexible nano-artificial heart for permanent use"
Written by عضو ارتباطProf. Dr. Saad Mahmoud Ali, The Head of Biomechanics Branch in Biomedical engineering Department , obtained the patent entitled “Design of a Soft Nano-Artificial Heart for Permanent Use.”
Where the patent focused on the development, design, modeling and analysis of a new generation of flexible artificial hearts, at low cost, easily operable, real size, low energy consumption, and high durability to replace the living heart of the patient permanently and not for a limited time as current artificial hearts work. Numerical simulations and investigations were carried out using SOLIDWORKS 17 and ANSYS 15.7 design software.
Multi-Physics Structural Analytical Systems, Fluent Fluid Flow Analysis (CFX) and (CFD) systems to determine the dynamic response of blood and compressed air on the elastic performance of the heart during active blood flow cycles. Biomechanical modeling and performance analysis of the flexible artificial heart were carried out using finite element software and ANSYS R18.0 software. Design Expert 11.0 software and Response Surface Technology (RSM) were also used to validate and improve the biomechanical performance of the newly designed flexible core.The simulation results showed that during the maximum absolute pressure applied to the ventricles and air pressure chambers, the heart's performance is completely safe, as shown by the animated graphs. The results also showed that the stress energy, total deformation, maximum main elastic stress, stress-fatigue safety modulus and fatigue life reached their optimal values.
Biomedical engineering department students participate in an international conference
Written by عضو ارتباطUnder the supervision of the Head of the Biomedical Engineering Department Dr.wisam kazem hamdan and Ph. Dr. Saad Mahmoud Ali, a group of students from the Biomedical Engineering Department participated in an international conference and obtained approval to publish the research in a journal from Scopus Containers.
The research dealt with the study and discussion of current issues related to components, designs, manufacturing and processing methods of a continuous passive motion machine (CPM). Review and study of the latest research and studies related to continuous passive motion machine (CPM) design and related study of lower extremity diseases, advantages and complications of the operation. The design, development, and manufacture of a simple, lightweight continuous passive motion (CPM) machine was implemented as an effective way to help relieve knee pain through physical therapy. The design and manufacture of many parts of the machine involved the use of ANSYS 18.0 mechanical design software.
The design and manufacture of many parts of the machine involved the use of ANSYS 18.0 mechanical design software. 3D printing was carried out. The efficiency of the productive device (CPM) with the three speeds provided by the device has been tested and checked on many patients paralyzed due to strokes, risks after knee surgery and severe pain in the lower extremities. The device has been shown to be of great help to patients in reducing pain, the risk of DVT after knee surgery in increasing the range of motion of the joint, and decreasing the length of hospital stay.
More...
The Head of the Biomedical Engineering Department participated in the discussion of a postgraduate student
Written by عضو ارتباطProf. Dr. Wissam Kazem Hamdan - Head of the Biomedical Engineering Department participated in the discussion of a postgraduate student with his tagged thesis
" Empirical and simulated investigations of the dynamic, biological properties of the Bop-Ceramic system used as Orthopedic materials"
Where the discussion committee was chaired by Prof. Dr. Nabil Kazem Abdel Sahib at Al-Nahrain University - College of Engineering - Biomedical Engineering Department
The discussion concluded with the student obtaining an honors degree, wishing him further success and excellence.
Ph. Dr. Raed Saleh Jawad received the silver medal for his participation with a patent in the work of the Fifth Exhibition of Patents and Industrial Models of the Ministry of Industry and Minerals 2022
Written by عضو ارتباطPh. Dr. Raed Saleh Jawad received the silver medal for his participation with a patent in the work of the Fifth Exhibition of Patents and Industrial Models of the Ministry of Industry and Minerals 2022, which was held at the headquarters of the Industrial Research and Development Authority 9-11-2022, wishing him more success and excellence in service for our beloved country.
The Biomedical Engineering Department held a workshop on the Ct scan
Written by عضو ارتباطUnder the patronage of the Head of the Biomedical Engineering Department, Ph.Dr.wisam kazem hamdan , The Biomedical Engineering Department held an introductory workshop on the Ct scan, delivered by the engineer (Ahmed Taha Ahmed Al-Jubouri), the official of the laboratory division in the department, Ph. Dr. ( Ali Galal).
It was held in the auditorium of the Civil Engineering Department, in the presence of the teaching staff, from among the students
Showing pictures showing the shape of the device and explaining its physical characteristics and its importance in detecting diseases. The subject was described through questions from the audience, and all questions were answered by the engineer. Ahmed Taha
Biomedical Engineering Department.
An engineer in the department holds a master's degree in the Biomedical Engineering Department - Al-Nahrain University
Written by عضو ارتباطThe engineer Marwa Jamal Muhammad, received an honors degree in the Master of Biomedical Engineering with her tagged thesis:
(DESIGN AND EVALUATION OF PROSTHETIC LIMB OSSEOINTEGRATION IMPLANTABLE ADAPTER)
Where her thesis dealt with the design and evaluation of implantable transformed prosthetic limbs and under the supervision of Prof. Dr. Marwan Nafeh Ali, the student's discussion was held in the Board Room of the Biomedical Engineering Department / College of Engineering / Al-Nahrain University. We wish her more scientific success.
