اخبار القسم en
Ph.Dr.Enas saad participates in a symposium at the Iraqi University entitled "Modern Means of Criminal Obstacles"
Written by عضو ارتباطPh. Dr. Enas Saad, in biomedical engineering department, participated in a symposium entitled "Modern Means of Criminal Obstacles", which was held at the Iraqi University in the College of Law and Political Science - Law Department, on Thursday, 11-3-2022, in the presence of Ph.Dr. Nour Saad Muhammad and a number of the teaching staff and students, the symposium dealt with the importance of DNA and other types of albums and focused on the importance of DNA in criminal Spanish globally and in the Arab world and an attempt to make it a proof and not a local equivalent. The symposium dealt with mentioning the legal aspects of the subject.
Prof. Dr. Marwan Nafie Ali participated in the doctoral discussion committee in College of Dentistry / University of Baghdad
Written by عضو ارتباطProf. Dr. Marwan Nafie Ali in biomedical engineering department participated in the discussion committee of the doctoral student (Ali waleed hadi)
Investigations into the structural characterization of a magnetic mnemonic CO-Ni-AI alloy in an effort to develop a root filler coolant. in the College of Dentistry / University of Baghdad as part of the requirements for obtaining a doctorate degree in dental treatment. The thesis was successfully approved.
The head of department participated in the doctoral discussion committee in College of Dentistry / University of Baghdadt
Written by عضو ارتباطThe head of the department Ph.Dr. wisam kazem hamdan participated in the discussion committee of the doctoral student (Ali saad hasan)
Change the design of three different rotary root fillers in the College of Dentistry / University of Baghdad as part of the requirements for obtaining a doctorate degree in dental treatment. The thesis was successfully approved.
Prof. Dr. Marwan Nafie Ali participated in the doctoral discussion committee in College of Dentistry / University of Baghdad
Written by عضو ارتباطProf. Dr. Marwan Nafie Ali in biomedical engineering department participated in the discussion committee of the doctoral student (Mohamed Khalil Sabah)
Fabrication and evaluation of beta-titanium rotary endodontic files for nickel-allergic patients in the College of Dentistry / University of Baghdad as part of the requirements for obtaining a doctorate degree in dental treatment. The thesis was successfully approved.
The Biomedical engineering department teams scored 3 goals in the University's Football Championship
Written by عضو ارتباطThe team of lectures and members of the Biomedical Engineering Department in football defeated the team of the Department of Communications Engineering by three goals to one in the match that was held at the University of Technology Stadium within the first round of the President’s Football Tournament for Teachers.
The President of the University of Technology football tournament for teachers was launched on Tuesday morning, corresponding to 11/10/2022, with the participation of all university departments.
Congratulations to the team members for this great victory, wishing them success in the upcoming matches and winning the championship title.
Discussion of a graduation project entitled "Design and Modification of the Bacterial Incubator for the Laboratory"
Written by عضو ارتباطDiscussion of a graduation project entitled "Design and Modification of the Bacterial Incubator for the Laboratory"
Under the supervision of Ph. Dr. Enas Saad Mahmoud
Students names
Abdullah Akram
Karar Haider
Shinar Hassan
Mubarak Saleh
Discussion Committee
Ph. Dr. Saad Mahmoud Ali
Ph.Dr. Zahraa Mohamed Abdel Hassan
Asst.lect. Alaa Hussein Younes
A microbiological culture or cell culture incubator is a device used to grow and maintain microbiological cultures or cell cultures.The incubator maintains an optimal temperature, humidity, and other conditions such as CO2 and oxygen content of the interior atmosphere. Incubators are used to culture both bacterial and eukaryotic cells and are essential for much experimental work in cell biology, microbiology, and molecular biology.
Discussion of a graduation project entitled "Patient Monitoring from Home"
Written by عضو ارتباطEach of the fifth stage students, whose names are attached below, discussed a graduation project entitled ((Patient Monitoring from Home)).
Students names:-
1- Wafaa Hassan Ali
2- Aisha Karim Ali
3- Taher Falah Abed Aoun
Supervisor name
Ph.Dr. Ziad Qassem Habib
Discussion Committee
Prof.Dr. Wissam Kazem Hamdan
Ph.Dr. Zahraa Mohamed Abdel Hussein
Asst.Lect. Atheer audience
About the project:-
Where the research dealt with the use of a factory sensor to measure the patient’s temperature, heart rate, electrocardiogram, room temperature and room humidity. The patient can monitor them.
Discussion of a graduation project entitled "Development and validation of biomaterial for biomedical application"
Written by عضو ارتباطDiscussion of a graduation project entitled "Development and validation of biomaterial for biomedical application"
Where the research dealt with the applications of using nanomaterials extracted from jitosan. At the beginning, an overview of the wound healing process was presented, followed by a discussion on the properties of jitosan and its nanoparticles and their suitability for treating wounds. Then the mechanisms exerted by chitosan nanoparticles (in the wound healing process) were addressed, discussed and analyzed critically and in detailed sections. We mention, among them; hemostasis, preventing infection, immune response (inflammatory) and the time taken to close the wound.
Student names:
Ahmed Tariq Tawfik
Taha Qusay Taleb
Bilal Samir
Hussein Ali Mahdi
Discussion committee names:
Prof. Dr. Jinan Star Khashan
Asst.lect. Mays Sabah
Asst.lect. Saad Mahmoud
supervisor name :
Prof.Dr.Sabah saad
Discussion of the graduation project entitled "Design and implementation of smart hydraulic damper for artificial limbs"
Written by عضو ارتباطDiscussion of the graduation project entitled "Design and implementation of smart hydraulic damper for artificial limbs"
the project discusse Smart Hydraulic Damper is part of sem-active type prosthetic Knee. Magneto rheological Damper is type of Smart Hydraulic, which assists prosthetic knee to performing all function with small energy and high control. The principle of MR prosthetic knee depending on spring-damper mechanisn and generater mechanisn wich work harmony together. The spicial properties of MR Damper is low consumption of energy and absorbing shock that causes reduces inflammation in end of transfamer. The results show the designed MR damper is better than off-the-shelf MR dampers for the application
Students names :
Ali Faleh Mortada
Hussein Laith Abbas
Muhammad Mahdi Adnan
Zainab Karim
Discussion Committee:
Ph.Dr. Jamal Mohamed Hamad
Ph.Dr. Enas Saad Mohammed
Eng. Ayoub Qassem
.jpg)
Discussion of a graduation project entitled "BUILDING AND DEVELOPMENT OF A PROTOTYPE CENTRIFUGE AND MINI-REFRIGERATOR FOR MEDICAL EQUIPMENT"
Written by عضو ارتباطDiscussion of a graduation project entitled "BUILDING AND DEVELOPMENT OF A PROTOTYPE CENTRIFUGE AND MINI-REFRIGERATOR FOR MEDICAL EQUIPMENT"
Student's name:
1- Ali Abbas Abo Alhail
2- Mustafa Laibi Madah
3- Sajjad Hassan Hawi
supervisors:
Asst. Prof. Dr. Awfa Abdul Rassoul Abdullah
Asst. Lec. Dalia Muhammad Ali
Discussion Committee
ِِAsst.Dr. Alaa Mohamed Dawood
Asst.Lec. Husam Yahya
Asst.Lec. Atheer Jumhur
Centrifugation is a very old technology, and with the advances in the medical field and laboratories, it has faced many challenges. In this project, we have developed effective tools for the centrifugal process. Where we started by designing a centrifuge prototype
body, rotor, motor base, and brake components using the program (AutoCAD) and printed using Anycubic i3 Mega 3D printer. there are safety components including a micro switch or a lid sensor to automatically turn off the motor when the lid is open and a brake unit to stop the motor simultaneously when the user opens the lid.
as well as This mini fridge can store the samples at appropriate temperatures to transfer them to the specialized medical care center to perform the necessary medical tests on them. A temperature range between (5–10 °C) was obtained.
More...
Discussion of a graduation project entitled "Preparation of the arc furnace for powder products"
Written by عضو ارتباطDiscussion of a graduation project entitled "Preparation of the arc furnace for powder products"
Student names:
Hassan Riad Majid
malak Hatem Owaid
Nour Al-Huda Riyad Nasser
Zine El Abidine Khaled Ajeel
project supervisor :
Prof. Dr. Marwan Nafeh Ali
Names of the honorable debaters:
Ph.Dr. Ziad Qassem Habib
Asst.lect. Hossam Yehia
Asst.lect. Hoda Taleb
Electric arc furnaces (EAFs) are extensively employed in steel production and nonferrous metal smelting. Typical electric arc furnaces have a power range of 10MW to 100MW. Laboratory electric arc furnace is a minimized AC electric arc furnace which consumes around 5KW of power. The aim of remodeling a minimized EAF is to refine some types of metals to have much better electrical and thermal conductivity, the way of getting these characteristics in laboratory with a cost-effective method is by melting the material using the minimized EAF, then rapidly cooling the molten metal with crushed ice put around the crucible. Using this type of EAF in combination with this cooling method will give smallest grain size possible after the material reforms in a mold (amorphous crystal shape), which is the best in terms thermal and electrical conductivity. Stainless steel is an example for the materials that could be refined in that way, which can be used in variety of applications in the biomedical field and prosthetics inside the human body.
"Detection of corona virus using computerized tomography images"
Written by عضو ارتباطA group of fifth-grade students discussed a research entitled
"Detection of corona virus using computerized tomography images"
Students names
Youssef Abdul Razzaq Ajeel
Ibrahim Aladdin Mahdi
Maryam Hussein Khalil
The names of the discussion commite
Ph.D. Uday Fahd's piety
Asst.Lect. Dalia Mohamed Ali
The project based on CT scan chest images which entered into a system (set of codes algorithms) and used matlab to diagnosis COVID19, the program is started by image reading processing and finally covid detection by serial steps. System implements will use colors to label the infected parts of the lung and then shows the results as normal or Covid-infected patient.
Mechanical properties of a denture base polymer reinforced with natural and man-made fibers
Written by عضو ارتباطMechanical properties of a denture base polymer reinforced with natural and man-made fibers
Students' names
Ahmed Owaid Thajil
Basmala Hussain Majid
Bara Jassim Hadi
Raneen Fathallah Ghazi
Discussion Committee
Ph.D. Marwan Nafie Ali
Asst.Lect. Dalia Muhammad Ali
Where the research included addressing the problems of fracture of artificial teeth, where the fracture of dentures made of acrylic resin is still an unresolved problem. There is no ideal base material for dentures, but the properties of PMMA can be improved with some reinforcement. Therefore, the aim of this study is to improve the mechanical properties of the denture base material, and this was done by using synthetic glass fibers and natural toothpicks.
Design and Development of Industrial Monitoring System using LabVIEW
Written by عضو ارتباطDesign and Development of Industrial Monitoring System using LabVIEW
Students names
Youssef Abdel Karim
Zahraa Ghazi Attieh
Zahraa Hussein Hashem
Abdullah Iyad Salem
The names of the discussion committee
Dr. Ziad Qassem
Asst.lect. Diyar Jalal
A health condition monitoring application in LabVIEW will focus on this project. The health conditions will be monitored in real-time using a simulation setup to perform real-time monitoring of crucial health indicators such as temperature, blood pressure, oxygen level and other parameters. LabView software was used to create the system's capabilities successfully. Data from sensors were successfully simulated and logged and shown clearly and concisely. The system's performance was evaluated and found to satisfy the predetermined standards. This system may notify the user if specific parameters exceed or fall below a predetermined threshold by sounding an alarm or displaying a visual indicator. For automation operations, a crucial variable such as temperature, for example, must be monitored to ensure that logic can be included in the control algorithm and an emergency action may be needed.
